Propane Storage

It took us a while to come up with a safe and clever way to store our propane tanks. We've got two 10 lb aluminum propane tanks and no convenient storage that drains anywhere, but into the bilge. Not wanting to blow the boat to smithereens, we Googled some storage ideas to get inspired. We saw a few good ones for the tall vertical tanks (stainless fender holder that hangs on the rail), but not much for our size tanks. Matt wanted to use something like a bucket (only sturdier) so after some brainstorming the 20 quart stock pot/propane tank holder idea was born! It looks a bit funny, but works like a charm!



Our tanks are the 10 lb aluminum ones like this. They are about 16" tall and have a max diameter of 10.5". We bought the 20 quart aluminum stock pots that are 11" tall and have an inside diameter of 11.5". The tank fits in perfectly.
Matt bent some aluminum flat bar into the right shape to fasten the tanks to the push pit rails. He drilled a few holes in the bottom of each pot to act as a drain for any water that may get in or any propane that may leak out. A bungee through the top of the tank and over each pot handle and it's all secure.



And now we've got one stock pot/propane holder on each side of the stern. Safe, convenient, out of the way, and quite the conversation piece haha. That's it, project complete!




2 comments:

  1. Students will learn how to both satisfy state and federal training requirements for operating USTs and training Class C employees. Most importantly, students will learn how to avoid and minimize the releases of gasoline, diesel, and other fuel products, and the environmental harm caused by leaks. Complete your course and print your certificate in minutes!
    Online Storage Tank Operator Certification

    ReplyDelete
  2. Self storage companies can be inside a building, or they can be located outside. If the unit is located outside, or has a code entry, they allow their customers to visit their sheds at anytime, without an appointment.Man and Van Luton

    ReplyDelete